To Next PageTo Next PageWhy Black Max BM80913 engine fails to start?
The Black Max Pressure Washer engine may fail to start due to several reasons: there might be no fuel in the tank, so you should fill it. The spark plug could be shorted, fouled, or broken, in which case you should replace it. The ignition lead wire might be shorted, broken, or disconnected from the spark plug, so replace the lead wire or attach it to the spark plug.
What to do if Black Max BM80913 pump doesn’t produce pressure?
If the pump of your Black Max Pressure Washer isn’t producing pressure, it could be due to several reasons. Ensure that the high pressure nozzle is installed. Check that there is an adequate water supply. Inspect the trigger handle or spray wand for leaks. Clean the nozzle if it is clogged. Also, squeeze the trigger on the trigger handle to remove air from the line.
How to fix Black Max BM80913 machine that doesn’t reach high pressure?
If your Black Max Pressure Washer isn’t reaching high pressure, the diameter of the garden hose may be too small, replace it with a 3/4 in. garden hose. Another reason could be that the water supply is restricted, so check the garden hose for kinks, leaks, and blockages. Also, make sure that you open the water source full force and that the high pressure nozzle is attached.
What to do if detergent fails to mix with spray in Black Max BM80913?
If the detergent fails to mix with the spray in your Black Max Pressure Washer, ensure that the detergent injection hose is properly submerged in the detergent container or detergent bottle. Also, make sure that you are using a low pressure nozzle (black) to apply detergent instead of a high pressure nozzle.
General| Brand | Black Max |
|---|---|
| Model | BM80913 |
| Category | Pressure Washer |
| Language | English |
Emphasizes reading manuals, checking parts, safe work area, proper attire, and alertness.
Covers avoiding flammable conditions, explosive atmospheres, and operating under influence.
Highlights wearing eye protection and not directing the spray at people.
Rules for directing water streams, using chemicals, and handling fuel safely.
Guidelines for operating on level surfaces, maintenance, storage, and fuel handling.
Maintaining distance from hot parts, flammables, and ensuring proper clearances.
Symbols for wet conditions, reading the manual, eye protection, and safety alerts.
Symbols indicating hot surfaces, injection risk, explosion, fire, toxic fumes, kickback, shock, and burns.
Explains the meanings of DANGER, WARNING, and CAUTION signal words.
Details requirements for servicing and contacting authorized centers.
Specific warning about eye protection during operation.
Lists product specifications and advises familiarizing with the tool.
Describes engine switch, fuel tank, engine, hose storage, recoil starter, and trigger handle.
Explains spark arrestor, thermal relief valve, and trigger lock-out.
Procedures for unpacking, checking parts, and handling warnings.
Guides for installing handle, attaching hose, and connecting parts.
Warnings related to damaged parts, modifications, and spark plug wire.
Steps for connecting the high-pressure hose to the pump and garden hose to the machine.
Safety warnings and a list of common applications for the pressure washer.
Guides for checking/adding engine lubricant and safely adding gasoline.
Details on using oxygenated fuels and potential issues.
Step-by-step instructions for starting and stopping the pressure washer.
Guidance on operating the trigger, selecting nozzles, and changing them.
Instructions for washing with detergent and using a detergent bottle.
Procedures for before shutting off the engine, rinsing, and moving the machine.
Advice on general cleaning, chemical contact, and pre-operation checks.
Covers nozzle maintenance, engine lubricant, spark plug, air filter, hoses, and pump.
Instructions for storing the machine and preparing it for use after storage.
Solutions for engine failing to start, starting hard, or lacking power.
Troubleshooting for detergent mixing issues and pump pressure problems.
Solutions for the machine not reaching high pressure.
Details the warranty period and coverage for the pressure washer.
Lists items and conditions not covered by the warranty.
Information on locating service centers and understanding legal rights.
Warning about chemicals in engine exhaust.
Contact info for parts/service and recording model/serial numbers.
