To Next PageTo Next PageWhat to do if AC receptacle does not work on Black Max BM907000B Portable Generator?
If the AC receptacle on your Black Max Portable Generator isn't working, here's what you can check: * **Circuit Breaker:** Verify that the AC circuit breaker is turned ON. * **GFCI:** Reset the GFCI if it has tripped. * **Defective Item:** The item you've plugged in might be defective. Try plugging in a different item to test the receptacle.
Why Black Max BM907000B Portable Generator engine lacks power?
If your Black Max Portable Generator engine lacks power, consider these potential causes: * **Air Filter:** A dirty air filter can restrict airflow. Inspect the air filter element and clean or replace it as needed. * **Fuel Issues:** If the engine was stored without treating or draining gasoline, or if it was refueled with bad gasoline, drain the fuel and carburetor. Then, refuel with fresh gasoline.
What to do if Black Max BM907000B makes a 'spark knock' noise?
An occasional light knocking or pinging noise under a heavy load isn't usually a cause for concern. Try switching to a different brand of gasoline with an octane rating of 86 or higher. However, if the knocking or pinging occurs under normal load at a steady engine speed, the problem may be with the brand of gasoline being used.
General| Brand | Black Max |
|---|---|
| Model | BM907000B |
| Category | Portable Generator |
| Language | English |
Rules to ensure safe operation and prevent specific hazards during generator use.
Explains the meaning of danger, warning, caution, and notice signal words.
Details how to properly ground the generator for electrical safety and compliance.
Guidelines for safe operation including fuel handling, ventilation, and electrical safety.
Advice on operating temperature, humidity, and location placement.
Explains hazard symbols and their corresponding meanings for user safety.
Details the meaning of various safety labels found on the generator unit.
Guidance on selecting appropriate extension cord sizes for generator loads.
Information on starting and running watts required for electric motors.
Explains the function and testing of the generator's GFCI receptacles.
Steps to determine the necessary running and starting watts for connected appliances.
Procedure for sequentially connecting loads to the generator for optimal performance.
Key technical details including engine type, fuel volume, voltage, and dimensions.
Describes the function of various parts like AC circuit breakers, air filter, and fuel valve.
Instructions for unboxing and verifying all included parts for assembly.
Step-by-step guide to attach the rubber feet to the generator frame.
Procedure for connecting the battery for electric start and safety precautions.
Essential checks and procedures before starting the generator.
Instructions on how to safely adjust the generator's handle for movement.
Guidance on adding fuel stabilizer to prevent fuel degradation during storage.
Instructions for safely adding gasoline to the generator's fuel tank.
Procedures for safely shutting down the generator under normal and emergency conditions.
Basic cleaning procedures for the generator's exterior and air vents.
Steps for checking, cleaning, and gapping the spark plug for optimal engine performance.
Information on cleaning carbon deposits from the exhaust port and muffler.
Procedure for replacing a clogged fuel filter to ensure proper fuel flow.
Guidelines for safely preparing and moving the generator for transport.
Regulatory compliance information regarding radio frequency interference.
A table outlining recommended maintenance tasks and their frequency.
Common causes and solutions for the engine failing to start.
Troubleshooting steps for reduced engine power output.
Solutions for when the generator's AC outlets are not providing power.
Explains the terms, duration, and conditions of the product warranty.
Contact information and procedure for requesting warranty service or repairs.
Information on obtaining service and replacement parts for the generator.
