EasyManua.ls Logo

Black + Decker BEHTS300 - User Manual

Default Icon
32 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Please read before returning this product for any reason.
àLIRE avant de retourner ce produit pour quelque raison que ce soit.
LEA EL MANUAL antes de devolver este producto por cualquier motivo.
INSTRUCTION MANUAL
MODE D’EMPLOI
MANUAL DE INSTRUCCIONES
final page size: 8.5 x 5.5 in
HEDGE TRIMMER
TAILLE-HAIE
PODADORA DE SETOS
BEHT200
BEHTS300
BEHT350
BEHTS400

Table of Contents

Questions and Answers

  • V
    Vicki McguireAug 7, 2025
    What to do if my Black + Decker Trimmer won't start?
    • H
      Henry LeeAug 7, 2025
      If your Black + Decker Trimmer doesn't start, here are a few things to check: * Make sure the lock off is fully forward before you pull the main trigger. * Ensure the trimmer is plugged into a working outlet. * Check the circuit fuse and replace it if it's blown. If the fuse repeatedly blows, stop using the trimmer and have it serviced by a BLACK+DECKER service center or authorized servicer. * Reset the circuit breaker if it has tripped. If the breaker repeatedly trips, discontinue use and have the trimmer serviced. * If you suspect the cord or switch is damaged, have it replaced at an authorized BLACK+DECKER service center.
  • T
    Tina CollierAug 20, 2025
    Why are the blades on my Black + Decker Trimmer running slow, noisy, or hot?
    • B
      bianca62Aug 21, 2025
      If the blades on your Black + Decker Trimmer are running slowly, are noisy, or getting hot, try the following: * Lubricate the blades. * Straighten any bent blades or blade supports. * Straighten any bent teeth on the blades. * Tighten the blade bolts.

Summary

General Power Tool Safety

Work Area Safety

Electrical Safety

Precautions related to power sources, cords, and wet conditions.

Personal Safety

Advice on staying alert, using protective equipment, and preventing accidental starts.

Hedge Trimmer Safety Warnings

Components and Assembly

Components (Fig. A)

Attaching Guard and Bail Handle

Operation

Attaching Extension Cord

Proper Hand Position

Guidance on how to hold the trimmer correctly for safe operation.

Switch Operation

Instructions on how to turn the hedge trimmer on and off.

Trimming Techniques

Covers cord management, working position, and specific trimming methods like new growth and leveling.

Troubleshooting

Slow running, noisy or hot blades

Unit will not start

Potential reasons why the unit fails to start and troubleshooting steps.

Black + Decker BEHTS300 Specifications

General IconGeneral
BrandBlack + Decker
ModelBEHTS300
CategoryTrimmer
LanguageEnglish

Related product manuals