Need help?Do you have a question about the Black Ridge BRI40 and is the answer not in the manual?
Provides contact numbers and operating times for customer support.
Details about warranty registration, coverage, and claim process.
Specifies what is covered and not covered by the inflator warranty.
Outlines the steps and required information for making a warranty claim.
Confirms the inflator is oil-free and requires no lubrication.
Details the necessity of full inflator assembly before use to maintain warranty.
Covers child/pet safety, work environment, electric shock, and work area.
Includes guidelines on duty cycle, correct tool use, and forced operation.
Instructions on proper handling and care of the power cord.
Prohibits extension cords; recommends longer air hoses for distance.
Warning about hot parts and guidance on maintaining the inflator.
Covers disconnecting, removing keys, preventing accidental starts, and fire precautions.
Ensures the inflator is in good working order before operation.
Recommends clothing, hair, eye, footwear, and respiratory protection.
Advises on maintaining balance and avoiding awkward body positions.
Emphasizes alertness, common sense, and avoiding operation under influence.
Details about plug compatibility, voltage, and cord replacement.
Advises against using inflator near combustible materials or ignition sources.
Covers duty cycle, extension cords, generators, and tool usage.
Includes advice on filling tank, unfamiliar sounds, and moving the inflator.
Guidance on unpacking the inflator and disposing of packing materials.
Details on attaching rubber stoppers and the air filter.
Ensures correct power point connection and avoids extension cords.
Instructions on using the ON/OFF button on the pressure switch.
States that the inflator does not require a running-in period.
A list of steps to follow before starting the inflator.
Steps for connecting air hoses and tools after initial setup.
Explains how the pressure switch controls automatic start/stop.
Steps for finishing use, including draining the tank and storing equipment.
Details about the fixed 8 Bar pressure and the need for a regulator.
Procedure to check the safety valve's operation, requiring safety glasses.
Instructions for connecting and using the 'Nitto style' air fitting.
Guidance on opening and sealing the drain tap for moisture removal.
Checks to perform before use, including drain tap and safety valve.
Steps to perform after use, including draining, wiping, and storing.
Addresses problems like inflator not starting or not building pressure.
Explains that this smell may occur after exceeding duty cycle.
Directs users to authorised service agents for repairs.
Lists parts that can be replaced by the user, with part numbers.
General| Brand | Black Ridge |
|---|---|
| Model | BRI40 |
| Category | Power Tool |
| Language | English |
To Next Page