ENGLISH
BLACKSTONEPRODUCTS.COM/SUPPORT
| OWNER’S MANUALASSEMBLY GUIDEMODEL:
STEP 10
Use one (1) M6x12 screw to assemble the hose retainer.
Use one (1) M6x12 screw to attach the LPG hook to the left leg
assembly.
Use one (1) M6x12 screw to attach the LPG support to the bottom of
the left leg assembly.
STEP 11
Use two (2) M6x12 screws to attach the power cord bracket
to the right leg assembly.
STEP 12
Attach three (3) side shelf pegs and (3) side shelf washers to
the left side shelf.
Attach three (3) side shelf pegs and (3) side shelf washers to the
right side shelf.
STEP 13
Thread two (2) M6 step bolts into the top holes on the
left side shelf and two (2) M6 step bolts into the top holes on the
right shelf.
To Next Page
