ENGLISH
BLACKSTONEPRODUCTS.COM/SUPPORT
OWNER’S MANUAL | ASSEMBLY GUIDE
Make sure the front pins are
seated in the holes, then push
the griddle top back.
❶❶
Place the two front pins into
the front locking holes and push
the griddle top back.
❷❷
Then, set the two rear pins
into the rear holes.
❶❶
Place the two front pins into
the front locking holes and push
the griddle top back.
❷❷
Then, set the two rear pins
into the rear holes.
Make sure the front pins are
seated in the holes, then push
the griddle top back.
Make sure the front pins are fully
seated in the holes, then push
the griddle top forward to lock
the griddle in place.
Make sure the front pins are fully
seated in the holes, then push
the griddle top forward to lock
the griddle in place.
MODEL: 2295
❷ ❷
Place one (1) hood spacer
[c.] between the hood and the
griddle top, the small end into
the hood and the large end into
the griddle top.
❸❸
Thread one (1) M6x20 bolt
[a.] into the hood, hood spacer,
griddle top, and one (1) M6
lock nut [d.].
Repeat on the other side.
STEP 17
Attach the hood to the griddle top:
❶❶
Align the hood with the holes on the griddle top.
STEP 15
With the help of another person, place the griddle top on
the griddle body by aligning the four (4) pins to the holes of the body.
STEP 16
Use two (2) M6x12 bolts [j.] and two (2) handle bezels [h.] to
attach the hood handle to the griddle hood.
To Next Page
