EasyManua.ls Logo

Black Widow Security BW-1600 - User Manual

Default Icon
7 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
BEFORE INSTALLING THE BW-1600
DO read through this installation manual.
• DO NOT install the alarm brain in an engine compartment.
The alarm may arm itself when power is first connected.This is a normal condition.
ITEMS SUPPLIED WITH THE BW-1600
BW-1602 Receiver and Control Module BW-260PValet/Override Switch
BW-385 2-Button, Code Learning BW-180P LED Status Indicator
Transmitters (2)
BW-12016 Wiring Harness, Fuseholder, & Fuse
MTS-20W Six-tone, soft chirp, 120 dB Siren BW-296P Dual Zone Electronic Shock Sensor
BW-12016DL Door Lock Harness
OPTIONAL ACCESSORIES
Radar Field Sensor.........................................MAS-2 Backup Battery.......................................................BW500
Window Rollup.............................................WRM-2 Remote Starting.................................................RAS-101
Power Door Lock........................................PDL-50 Trunk Release ........................................................TR-100
Relay......................................................................SPDT Relay Socket........................................................BRS-003
5-wire Door Lock relay & socket.BRS-008PR Glass Sensor.......................................................BWS-200
(+) Door Lock Inverter.............................BW-345
SPECIFICATIONS
Operating voltage...............+12 VDC Neg. Ground
Code Learning ......................................3 Codes Max.
Current consumption.........5 mA (max) disarmed.
Siren output drive ......................................3 Amperes
Automatic reset........................................60 seconds.
Door Lock/Unlock Output ...................(-) 500 mA.
Channel 2 Output Drive........(-) 500 mA variable.
Remote control transmit freq.............................310 mHz.
Passive arming delay............................30 Seconds approx.
Auxiliary output drive..........................250 mA maximum.
Flashing output drive............................10 Amp maximum.
Trigger inputs..............................................1) Neg. pnswtch.
1) Pos. pnswtch. 1) Neg. sensor or aux. pnswtch.
INSTALLATION MANUAL
Please read this Black Widow manual carefully before attempting to install this system.
BLACK WIDOW
INSTALLATION MANUAL
Question and Answer IconNeed help?

Do you have a question about the Black Widow Security BW-1600 and is the answer not in the manual?

Black Widow Security BW-1600 Specifications

General IconGeneral
BrandBlack Widow Security
ModelBW-1600
CategorySecurity System
LanguageEnglish