Step 1. Place the Carrier frame (1) upside down on a solid work surface, place hitch tube (2) in
the ramp. Align the holes, secure with M10*25 hexagon bolt (4) and M10 lock nut (5). Place hook
tube (3) on the ramp, align the holes, secure with M10*50 bolt (6) and M10 lock nut (5). See FIG
1..
FIG 1
Step 2.
Attach Wheel chock drop-leaf (7),Wheel chock front frame(8) and Carrier frame (1) with M10*20
hexagon bolt (9) and M10 lock nut(5), tighten bolt and nut. Make a right choice of the right hole according to
wheel size. See FIG 2.
FIG 2
To Next Page
Loading...