Action Voice
command
Call control
key
Switch
between two
active calls
"Swap" Press and hold
for 2 seconds
Mute a call "Mute" Tap once
Turn off mute "Unmute" Tap once
End a call — Tap twice
Check the
battery power
level of the
headset
"Battery" —
Music tasks
Press the voice command key and use voice
commands to perform the following tasks when
playing music on yourBlackBerry® device.
Action Voice command
List available voice
commands
"What can I say?"
Play a media file "Play"
Play the next song in a
playlist
"Next track"
Play the previous song
in a playlist
"Previous track"
Pause a song "Pause"
Stop a file from playing "Stop"
Increase the volume "Volume up"
Decrease the volume "Volume down"
About automatic volume control
When you use the headset for the first time, you
can use the volume controls on your BlackBerry
device to set the volume to a comfortable listening
level. When the noise level around you changes, the
headset is designed to increase or decrease the
volume to maintain your comfortable listening level
automatically.
About using the headset with a GPS
enabled BlackBerry device
If your BlackBerry® device supports GPS technology
and you're using a third-party location-based app
on your device that provides driving directions, the
headset can announce those directions after you
pair it with your device.
For more information about using GPS technology
with your headset, click the Help icon on the Home
screen of your BlackBerry device.
LED notifications
Red LED
Flashing slowly: The microphone on the
headset is muted.
Flashing quickly: The headset is no longer
connected to your device.
Flashing quickly, followed by a pause: The
battery power level for the headset is low.
Blue LED
Flashing: The headset is connected to a call.
One slow flash: The headset is on and
connected with your device.
Three quick flashes: You have an incoming
call.
Five quick flashes: The headset is
reconnecting with the last device that you
paired it with.
Blue and red LED
The headset is ready to pair with your
BlackBerry device.
Green LED
Flashing: The headset is turning on or is
charging.
One flash: The headset is charging but the
battery level is low.
Two flashes: The headset is charging and
the battery level has reached
approximately 50 percent.
Three flashes: The headset is charging and
the battery level is high but the battery is
not fully charged.
Solid: The headset is fully charged.
Charge the headset
Your headset comes partially charged and ready for
use.
1. Connect the small end of the micro-USB cable
or small end of a car charger to the charging
port on the headset.
2. Connect the larger end of the micro-USB cable
to the USB power plug that came with your
headset. You can also connect to a USB port
on a computer, or plug the large end of a car
charger into your vehicle's power outlet.
Find the latest information about the
headset
For the most current product information such as
firmware updates, visit www.blackberry.com/
HS700.
Troubleshooting
I can't connect the headset with my device
You might have accidentally deleted the pairing
options that you set for your headset. Complete the
steps for connecting and pairing your headset with
your BlackBerry® device.
I can't hear anything when I use my headset
Try the following actions:
• Turn up the volume on your BlackBerry® device.
• Make sure that your headset is turned on and
is connected to your device.
To Next Page
Loading...