Need help?Do you have a question about the blackburn ATOM SL4.0 and is the answer not in the manual?
Instructions for replacing the cyclometer battery using a screwdriver or coin.
Displays the battery status for the cyclometer unit, speed sensor, and cadence sensor.
Steps for mounting the wired speed sensor and bracket on the front fork.
Steps for mounting the wireless speed sensor and bracket on the front fork.
Steps for mounting wireless speed and cadence sensors on the chain stay.
Description of the two operating buttons located at the base of the unit.
Steps to set wheel size and select measurement units (M/H or KM/H).
Automatically scrolls through data in a continuous loop.
Selects data display sequence for bike functions.
Selects data display sequence for altitude functions.
Shows the Average Cadence data.
Steps to set wheel size and measurement units for two bikes.
How to select and store data for two different bikes.
Guide to finding or measuring wheel circumference for accurate measurements.
Step-by-step instructions for manually measuring wheel size.
Instructions for setting the clock and choosing 12/24 hour format.
How to reset all current ride data for specific models.
How to reset various data points for specific models.
Unit enters sleep mode to conserve battery; how to resume operation.
How to set destination distance and view estimated arrival time.
How to view the current wireless transmission ID code.
Steps to change the ID code to avoid interference with other riders.
General| Display Type | LCD |
|---|---|
| Battery Life | 5 years |
| Functions | Current Speed, Average Speed, Maximum Speed, Trip Distance, Odometer, Clock |
| Water Resistance | Yes |
| Current Speed | Yes |
| Average Speed | Yes |
| Maximum Speed | Yes |
| Trip Distance | Yes |
| Odometer | Yes |
| Clock | Yes |
| Mounting | Handlebar |
To Next Page
