Why is the green light off on my BlacklineSafety Docking Station?
If the green light on your BlacklineSafety Docking Station is off, make sure the power cable is correctly plugged into both the dock and the power adapter. Also, verify that the power source you're using is 120/240 VAC.
What to do if my BlacklineSafety Docking Station's green light is on but it's not working?
If the green light is on, be sure that the charge clips on both the device and the dock are connected. Also, make sure the device clicks into place when set down into the dock, and the lid is properly closed by pressing down on both sides until both release tabs click. Finally, ensure the charge clips are free of any debris.
General| GPS | Yes |
|---|---|
| Man-Down Detection | Yes |
| Two-Way Voice Communication | Yes |
| Data Logging | Yes |
| Real-time Monitoring | Yes |
| Communication | 4G LTE, Bluetooth, Wi-Fi |
| Display | LCD |
| Durability | Impact resistant |
| Alerts | Audible, visual, vibration |
| Operating Temperature | -20°C to 50°C |
Lists all items included with the G7 device upon purchase and setup.
Visually details the physical components and features of the G7 device.
Explains the range of service plans tailored to client needs and business goals.
Details services like 24/7 monitoring, live data access, and analytics for G7 devices.
Describes the default frequency of communication to Blackline Live for each device type.
Compares features across different G7 cartridge types: standard, single-gas, multi-gas diffusion, and pump.
Details G7's operating temperature range and performance in extreme weather conditions.
Explains LEL sensor operation, factory settings, and sensor technologies.
Covers the procedures and programs related to maintaining G7 cartridges.
Explains Blackline's program for replacing expired G7 gas cartridges free of charge.
Provides step-by-step instructions for replacing the G7 gas cartridge.
Offers guidance on preventing sensor contamination and maintaining cartridge sensitivity.
Directs users to support articles for instructions on changing cartridge filters.
Details the function and usage of the G7 device's physical buttons.
Explains the procedure for powering on the G7 device, including model-specific steps.
Details the steps for safely shutting down the G7 device and G7 Bridge.
Describes the G7's LCD screen and how it conveys device status information.
Explains the information presented on the G7's home screen, including battery and sensor data.
Details how to access and navigate the G7's main menu for available features.
Explains how to use the quick select menu for shortcut access to frequently used features.
Provides instructions on how to properly wear and secure the G7 device.
Details the recommended procedure for charging the G7 device using its accessories.
Explains the process of acknowledging operational notifications on the G7 device.
Lists and describes various operational notifications like low battery, lost connection, etc.
Details how to respond to and mute low urgency notifications on the G7.
Describes pending and non-pending low urgency alerts like fall or no-motion detection.
Explains how to respond to and mute high urgency notifications on the G7.
Lists and describes high urgency alerts such as fall, no-motion, and high gas alerts.
Explains the purpose and procedure of bump testing G7 sensors to verify functionality.
Details the process of adjusting sensor parameters to ensure accurate gas detection.
Provides instructions for calibrating Chlorine Dioxide (ClO2) sensors using a gas generator.
Explains calibration for Ozone (O3) sensors using a gas generator and oxygen mix.
Details how to manually zero G7 sensors when the baseline may have shifted.
Guides users on accessing gas sensor information, resetting readings, and defaults.
Provides steps to navigate to and open the Gas Info menu on the G7 device.
Explains how to view gas set points, last calibration, and bump test dates.
Details how to view and reset peak gas readings, STEL, and TWA values.
Allows toggling notifications for LEL sensor after gas levels return to normal.
Explains how to view the configured target gas for the Photoionization Detector (PID) sensor.
Describes modes like Normal, Pre-entry, SCBA, Leak check, and High risk for G7 operation.
Ensures timely notifications for calibration and bump tests upon device start-up.
Locks device functionality until calibration or bump test is completed on start-up.
Adds a time buffer to high gas alerts, preventing false alarms from momentary spikes.
Details how to attach and use the pump cartridge for active area testing.
Highlights features like local time, timer, and stopwatch for enhanced usability.
Explains how to configure the G7 banner to display the local time instead of the check-in timer.
Details how to manually set the time zone and offset on the G7 device.
Provides instructions for setting and using a custom length timer on the G7 device.
Explains how to start, stop, reset, and view the stopwatch function on the G7.
Details the process of sending and receiving voice messages using the G7c PTT feature.
Explains how to change PTT channels, including specific channels, receive only, and all call.
Describes how to adjust the volume for incoming PTT calls on the G7 device.
Covers pairing and managing audio accessories for Push-to-Talk functionality on G7c.
Details how to access and read SMS messages received from Blackline Live on the G7c.
Explains how to send pre-programmed and custom SMS messages from the G7c.
Guides users on how to access and navigate the G7's device settings menu.
Explains how to view and update the G7's banner display (check-in timer or local time).
Details how to view and update the device's language settings on the G7.
Provides access to settings related to the G7 pump cartridge options.
Explains how to enable or disable the sample timer for the G7 pump cartridge.
Details how to set the tubing length for the G7 pump cartridge for sample timing.
Guides users on how to access detailed device information for troubleshooting.
Explains how to view hardware and activation records like Unit ID and device version.
Details how to view the assigned user information for the G7 device.
Explains how to view GPS location data, including time, satellites, and coordinates.
Provides information on device location beacon communications and signal strength.
Details how to view cellular communication status, signal level, and provider.
Explains how firmware updates are gradually downloaded when the G7 is connected.
Describes the automatic installation process of downloaded firmware updates.
Explains how to obtain firmware update kits for G7 Bridge when cellular range is unavailable.
Provides a link to find support and training materials for the G7 device.
Lists contact information for Blackline Safety's technical support team.
Presents comprehensive technical details of the G7 device, including features, size, and environmental specs.
Details the wireless capabilities of the 3G G7c, including cellular, Bluetooth, and location technology.
Lists specifications for various gas sensors, including type, range, and resolution.
Contains important information regarding document usage, copyright, and trademarks.
Details the intrinsic safety certifications and standards for the G7 device.
To Next Page
