Black+Decker BDT50WTB - General Information; Specifications

Page 15
SET UP & USE
GENERAL INFORMATION
Recommended humidity levels:
30%-50% (Too dry, less than 15%, too humid, greater than 50%)
During operation, it is normal for the exhaust coming from the side of the
dehumidier to be warm.
Caused by preliminary factory testing, there may also be a small amount of water
present in the bucket before using the dehumidier for the rst time, which is normal.
Operating temperature: 41˚F-90˚F (5˚C-32˚C)
Operating humidity: 30% RH-90% RH
SPECIFICATIONS
BDT20WTB
Dehumidifying capacity: 20 pints per day
Bucket capacity: 8 pints
Air ow volume (high/low): 182/155 CFM
Power: 115v, 60 Hz, 3.5A
Power consumption: 260 watts
BDT30WTB
Dehumidifying capacity: 30 pints per day
Bucket capacity: 8 pints
Air ow volume (high/low): 182/155 CFM
Power: 115v, 60 Hz, 4.2A
Power consumption: 330 watts
BDT40WTB
Dehumidifying capacity: 40 pints per day
Bucket capacity: 14.3 pints
Air ow volume (high/low): 182/155 CFM
Power: 115v, 60 Hz, 5.0A
Power consumption: 395 watts
BDT50WTB
Dehumidifying capacity: 50 pints per day
Bucket capacity: 14.3 pints
Air ow volume (high/low): 182/155 CFM
Power: 115v, 60 Hz, 7.0A
Power consumption: 540 watts
BDT50PWTB
Dehumidifying capacity: 50 pints per day
Bucket capacity: 14.3 pints
Air ow volume (high/low): 182/155 CFM
Power: 115v, 60 Hz, 7.0A
Power consumption: 540 watts