4
ENGLISH
(Original instructions)
5
ENGLISH
(Original instructions)
u Injuries caused by prolonged use
of the appliance. When using any
appliance for prolonged periods
ensure you take regular breaks.
u Impairment of hearing.
u Health hazards caused by breathing
dust developed when using your
tool (example:- working with wood,
especially oak, beech and MDF.)
u If operating the mower in a damp
location is unavoidable, use a residual
current device (RCD) with a tripping
current of not more than 30 mA.
Use of an RCD reduces the risk of
electric shock.
u Never pick up or carry an appliance
while the motor is running.
Guard against electric shock
u The appliance must be connected to
a socket or extension cable containing
an earth connection.
u Electric safety can be further improved
by using a high-sensitivity (30 mA /
30 mS) residual current device (RCD).
u Your appliance is designed for use on
AC (mains) electrical supplies only.
Do not attempt to use it on any other
supply.
Extension cables
u When using the appliance outdoors,
only use extension cables intended for
outdoor use.
u Up to 25 m 1.5 mm
2
3-core extension
cable can be used without loss of
power.
u Always keep extension cords away
from moving hazardous parts to avoid
damages to the cords which can lead
to contact with live parts.
Operation
u Before starting the appliance, look into
the feeding chamber to make certain
that it is empty.
u Keep your face and body away from
the feed intake opening, long branches
may lash out when being pulled in by
the cutting gear. Do not allow hands or
any other part of the body or clothing
inside the feeding chamber, discharge
chute, or near any moving part.
u Keep proper balance and footing at all
times. Do not overreach. Never stand
at a higher level than the base of the
appliance when feeding material into it.
u Always stand clear of the discharge
zone when operating this appliance.
u When feeding material into the
appliance be extremely careful that
pieces of metal, rocks, bottles, cans or
other foreign objects are not included.
u If the cutting mechanism strikes any
foreign objects or if the appliance
starts making any unusual noise
or vibration, turn the appliance off,
remove the plug from the mains and
allow the appliance to stop.
u Inspect the appliance for damage.
u Check for and tighten any loose
parts.
u Have any damaged parts replaced
or repaired with original parts by an
authorised repair agent.
To Next Page
Loading...