What to do if my Black+Decker Chainsaw will not start?
If your Black+Decker Chainsaw won't start, several factors could be the cause. First, ensure that the lock button is pressed. Also, check that the front guard is not in the brake position; if it is, reset it. Additionally, inspect the fuse and replace it if it's blown. Verify the RCD and check the mains supply to ensure it is connected.
Defines the chainsaw's purpose and provides essential general safety warnings.
Covers work area, electrical, and personal safety measures for operation.
Instructions on proper usage, tool care, and servicing recommendations.
Specific warnings for chainsaws, including kickback prevention and recommendations.
Guidance on what not to cut, bystander safety, residual risks, and vibration.
Explanation of tool labels, electrical safety, and extension cord usage.
Overview of tool features and warnings to observe during assembly.
Steps for oiling the chain and fitting the guide bar and chain.
How to check/adjust chain tension and manage the chain brake.
Instructions for starting, general operation, and various cutting methods.
Methods for cutting logs supported in various ways and removing branches.
Resolving common issues, performing routine maintenance, and chain care.
Guidance on sharpening the saw chain, replacing parts, and obtaining repairs.
Product specifications and guidelines for environmentally sound disposal.
General| Power Source | Corded Electric |
|---|---|
| Bar Length | 16 inches |
| Tool-less Chain Tensioning | Yes |
| Automatic Oiling | Yes |
| Chain Brake | Yes |
| Voltage | 230 V |
| Amperage | 10 A |
| Power | 2000 W |
To Next Page
