To Next PageTo Next Page
Need help?Do you have a question about the Black+Decker GH1100 and is the answer not in the manual?
General| Brand | Black+Decker |
|---|---|
| Model | GH1100 |
| Category | Trimmer |
| Language | English |
General power tool safety warnings.
Keep work area clean and well lit. Avoid explosive atmospheres. Keep children away.
Match plugs to outlets. Avoid body contact with earthed surfaces. Do not expose to rain. Do not abuse cords. Use outdoor extension cords. Use RCD/GFCI in damp locations.
Guard must always be installed for user protection.
Wear eye protection. Inspect area for sharp objects. Trim side-to-side. Convert to edger. Position for edger use. Return to trimmer position.
Uses 2mm round nylon line. Automatic feed. Line wears faster on abrasive surfaces.
Steps to clear jams: unplug, remove cover, clear spool, place spool/line, insert line ends, press/rotate spool, replace cover.
Use 2mm (0.08") diameter lines. Steps: unplug, remove spool, choose option 1 or 2.
Unplug before maintenance. Use recommended parts. Inspect and maintain regularly. Store away from children. Keep air intake slots clear. Store line in sealed bag. Clean plastic parts.
Maintain line cutter edge with file. Repairs/maintenance by authorized service centers.
Use DF-080 replacement spool. Use only 2mm monofilament lines. Don't use serrated/heavy gauge lines.
Black+Decker offers service locations. Contact for advice, repair, or parts. Visit website.
GH1100 model. Power 900W. Voltage 120V~60Hz. Speed 7200/min.
