To Next PageTo Next Page
Need help?Do you have a question about the Black+Decker GST33 and is the answer not in the manual?
General| Brand | Black+Decker |
|---|---|
| Model | GST33 |
| Category | Brush Cutter |
| Language | English |
Explains safety symbols like Danger, Warning, and Attention for hazard recognition.
General safety warnings and instructions for power tools, emphasizing reading all warnings.
Always wear safety spectacles or goggles when using the tool.
Do not use the tool without the guard attached.
Avoid loose clothing and jewelry; wear protective footwear and long pants.
Keep face, hands, and feet clear of the rotating nylon line at all times.
Ensure workers and children are at a safe distance, especially children.
Work away from solid objects to reduce ricochet injury.
Do not carry the tool with a finger on the trigger.
Stop immediately if entangled, check for damage, and repair before use.
Warnings about using unmixed, old, or alternative fuels, and correct fueling procedures.
Specifies using 89 Octane unleaded gasoline and ISO-L-EGD two-stroke oil.
Highlights flammability of fuel and precautions for mixing, storing, and handling.
Specifies the correct 40:1 ratio for gasoline and two-stroke oil mixture.
Detailed steps for starting a cold engine, including choke, purge bulb, and recoil starter usage.
Troubleshooting steps for issues like no fuel at carburetor/cylinder or wet muffler.
Solutions for engine stalling, including air filter, fuel filter, spark plug, and carburetor issues.
