Black+Decker POWERSERIES PRO HCUA525J User Manual

ENGLISH
7
Using the accessory tool (Fig. L–O)
• Press the main handle/wand release button
17
to free
the main handle/wand from the chassis
23
.
• Free the hose connector
3
from the main body hose
port
6
as shown in FigureL.
Fig. L
23
4
5
3
6
17
• Press the lift away canister release button
41
to release
and remove the lift away canister
5
from the chassis
23
as shown in FigureM.
Fig. M
23
41
5
• Connect the hOSE CONNECTOR
3
TO THE ACCESSORY
TOOL HOSE PORT
15
ENSURING THAT THE LATCH
16
CLICKS SECURELY INTO PLACE AS SHOwn in FigureN.
Fig. N
3
4
16
15
• Extend the crevice tool
19
as shown in Figure O, until it
clicks inplace.
• To retract the crevice tool
19
press the crevice
tool release button
16
allowing it to return to its
normalposition.
Fig. O
19
16
Using the 3 in 1 Accessory tool (Fig. P)
• The 3-in-1 accessory tool
18
has threeconfigurations.
- Brushmode.
- Small crevicemode.
- Upholsterymode.
• The 3-in-1 accessory tool can be fitted either directly to
the hose connector
3
or to the pet crevice tool
19
as
shown in Figure P.
Fig. P
19
3
18
18
Cleaning and emptying the vacuum

WARNING: Projectile/Respiratory Hazard:
Never use the vac without itsfilter.
NOTE: The filter is re-usable, do not confuse it with a
disposable dust bag, and do not throw it away when the
product is emptied. We recommend that you replace the
filter every 6–9 months depending on frequency ofuse.
There are two methods of cleaning the canister, a quick
empty method and a thorough clean method.
To empty the dust canister (Fig. L, M, Q, R)
• Press the life away canister release button
41
to release
and remove the lift away canister
5
from the chassis
23
as shown in FigureM.

Black+Decker POWERSERIES PRO HCUA525J Specifications

General

Brand	Black+Decker
Model	POWERSERIES PRO HCUA525J
Category	Vacuum Cleaner
Language	English