EasyManua.ls Logo

Black+Decker Vitessa ICR2020 - User Manual

Black+Decker Vitessa ICR2020
36 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ADVANCED STEAM CORD REEL IRON
PLANCHA CON SISTEMA AVANZADO DE VAPOR
Y CABLE RETRACTABLE
FER À VAPEUR À ENROULEUR DE CORDON INTÉGRÉ
use and care manual
manual de uso y cuidado
guide d’utilisation et d’entretien
ICR2010, ICR2020, ICR2030, ICR2040
ICR2010-IB_SPE-21570.indd 1 12/4/17 3:04 PM

Table of Contents

Questions and Answers

  • N
    Nancy CastanedaAug 7, 2025
    Why is my Black+Decker Vitessa ICR2020 Iron not steaming?
    • A
      annabradyAug 7, 2025
      If your Black+Decker Iron isn't producing steam, several factors could be the cause. First, the SmartSteam™ setting might be too low; try adjusting the dial to settings 4–6. Second, the water tank may be insufficiently filled; ensure it's filled to the Max level marker, following the instructions in the “filling the water tank” section. Lastly, the iron might not be fully preheated. The anti-drip feature prevents steam creation until the iron reaches the desired temperature, so allow additional heating time.
  • M
    Megan CooperAug 17, 2025
    What to do if my Black+Decker Iron is leaking?
    • B
      Brandon WhiteAug 17, 2025
      If your Black+Decker Iron is leaking or spitting water, it could be due to overuse of the Burst of Steam button. Allow more time between bursts for the iron to reheat. Alternatively, the SmartSteam™ setting might be too low. Lower temperature settings are not designed for steam; either turn the SmartSteam™ dial to settings 4–6 or use spray mist for additional moisture.
  • J
    Jennifer ThomasAug 27, 2025
    How to prevent discolored water from Black+Decker Vitessa ICR2020 staining fabric?
    • J
      jacquelinereynoldsAug 27, 2025
      If discolored water is coming through the holes of your Black+Decker Iron and staining the fabric, it is likely due to residue build-up in the soleplate cavity or in the soleplate holes. To resolve this, empty the water tank after each use and regularly use the Auto-Clean™ function to clean your iron. Also, avoid using descaling agents, perfumed or scented additives or starch. If you use starch, always clean your soleplate after using it. Finally, use only untreated tap water or a mix of half tap and half distilled water.

Summary

IMPORTANT SAFETY INSTRUCTIONS

GETTING TO KNOW YOUR VITESSA IRON

HOW TO USE

GETTING STARTED

Preparation steps before initial use.

FILLING THE WATER TANK

Instructions for adding water to the iron's reservoir.

USING YOUR IRON

Step-by-step guide for operating the steam iron.

SETTING GUIDE AND FEATURES

Even Steam Soleplate Design

Description of the soleplate's steam distribution technology.

ADVANCED IRON TECHNOLOGY

SmartSteam Technology

Control for soleplate heat and steam level with a single dial.

3-way Auto Shut-Off

Safety feature that automatically shuts off the iron when inactive.

Vertical Steaming

Method to use the iron as a steamer for garments and drapes.

CLEANING AND CARE

CLEANING OUTSIDE SURFACES

Instructions for maintaining the iron's exterior.

AUTO-CLEAN SYSTEM

Procedure for using the self-cleaning function to remove build-up.

STORING AND TIPS

STORING YOUR IRON

Guidelines for properly storing the iron after use.

IRONING TIPS AND TRICKS

Helpful advice for achieving better ironing results.

TROUBLESHOOTING

NEED HELP?

Warranty Information

Details about product warranty coverage, duration, and claims.

Black+Decker Vitessa ICR2020 Specifications

General IconGeneral
Soleplate MaterialNon-stick
Steam Output30 g/min
Water Tank Capacity300 ml
Weight1.2 kg
Auto Shut-offYes
Self-CleaningYes
Anti-drip SystemYes
Vertical SteamYes
TypeSteam Iron

Related product manuals