6
ENGLISH
(Original instructions)
Warning! never pour white vinegar or other liquid cleaners
for eliminating calcium into water tank!
Use the function once every two weeks.
• Release the button as soon as the water in the water
tank is used up.
Spray:
Press the spray button, water will be sprayed out from the
spray nozzle. At that time, you should keep enough water in
the water tank.
Steam ironing:
Turn the steam control to minimum position and set the
temperature control at the desired position or MAX position.
After the indicator goes out, turn the steam control to the
suitable position and the iron is ready for use.
Steam Burst:
Set the temperature control at the desired or MAX position,
then press down the steam burst button, the base plate will
spray out steam.
Dry iron:
Turn the steam control to minimum position and set the
temperature control to the suitable position then you can
start dry ironing.
Anti-drip:
This iron is equipped with a drip stop function. The iron
automatically stops steaming when the temperature is too
low to prevent water from dripping out of the soleplate.
Anti-calc:
The Anti-calc function filters the minerals from the water to
prevent mineral residue build up in the steam chamber.
Automatic shut off:
If the iron is switched on and not moved for a period of 8
minutes while standing on its heel or 30 seconds while
standing on the soleplate, an internal safety feature will
switch the iron off and the auto-shutoff indicator will blink.
Move the appliance sharply to switch it on again.
Ironing tips
• Always check first whether a label with ironing
instructions is attached to the article.
• Follow these ironing instructions in any case.
• The iron heats up quicker than it cools down, therefore,
you should start ironing articles requiring the lowest
temperature, such as those made of synthetic fibre.
• If the fabric consists of various kinds of fibres, you must
always select the lowest ironing temperature to iron the
composition of those fibres.
• Silk and other fabrics that are likely to become 'shiny'
should be ironed on the inner side.
• To prevent staining do not spray water straight on silk or
other delicate fabrics.
• Velvet and other textures that rapidly become shiny
should be ironed in one direction with light pressure
applied. Always keep the iron moving at all times.
• Pure woollen fabrics (100% wool) may be ironed with the
iron set at the steam position. Preferably set steam
button to the maximum position and use a dry cloth as a
mat.
Note: when ironing woolen fabrics, shining of the fabric may
occur. So it is suggested that you should turn the article
inside out and iron the reverse side.
Cleaning and maintenance & storage
Warning! Before cleaning and maintenance, switch the
appliance off and remove the plug from the socket.
Warning! Do not immerse the appliance or the cord set or
the plug in water or any other liquid.
• Wipe the exterior with a damp cloth.
• Do not use scouring pads.
• If necessary, use a mild detergent to remove spots. Do
not use any abrasive or solvent based cleaner. Do not
use chemical based de-scaling agents.
• Store your appliance in a cool dry area.
Mains plug replacement
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal of the new
plug.
• Connect the blue lead to the neutral terminal.
• If the product is class l (earthed), connect the green /
yellow lead to the earth terminal.
Warning! If your product is class ll double insulated (only 2
wires in the cord set), no connection is to be made to the
earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Any replacement fuse must be of the same rating as the
original fuse supplied with the product.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your BLACK+DECKER product
needs replacement, or if it is of no further use to you, do not
dispose of it with other household waste. Make this product
available for separate collection.
• BLACK+DECKER provides a facility for recycling
BLACK+DECKER products once they have reached the
end of their working life. This service is provided free of
charge. To take advantage of this service please return
your product to any authorised repair agent who will
collect them on our behalf.
To Next Page
Loading...
