3. connect WiFi
Connect Wi—Fi.Connect PC to the Wi—Fi network using the following
steps.
• Select the/icon
from the taskbar.
•Click the wifi icon-to turn on the wi—fi.
•Select an access point in the list Of available Wi—Fi connections. Select
one Of the connections to start the network connection.
Note: You may be prompted to enter a security key to activate a Wi—Fi
connection.
4. Enter the BIOS setting
The BIOS (Basic Input/ Output System) is the first software loaded
when the Mini PC starts.
•Enter Bios: Click "Del" or "ESC" key.
• Under normal circumstances, the default BIOS settings apply in most
cases to ensure optimum performance. DO not change the default BIOS
settings. Except for the following situation.
(You have installed new system components that require further BIOS
settings or update.)
Warning! Inappropriate BIOS settings may cause instability or startup
tailure. We strongly recommend that you can only change the BIOS
settings with the help of technical service personnel.
Precautions
1. Please take extra care when executing operations that may cause
damage or loss Of documents.
2. Pay attention to virus protection during the use of mini—host, and try to
use virus firewall.
3. Please turn off the mini—host and disconnect the power supply if you
don't use it for a long time.
4. DO not switch on and Off the mini—host frequently in a short period
Of time It is recommended that the interval between two startup times
should be at least 10 seconds, preferably not less than 60 seconds.
5. Pay attention to moisture—proof, and keep the use environment clean
and sterilized. If there is dust on the
host machine, please wipe it with a dry soft cloth.
6. Avoid direct exposure of strong light to mini—host, and do not approach
strong magnetic field.
7. Do not get water, food and other fluids onto the mini—host, and do not
pull the data cable, power cord, etc.
3
To Previous Page
Loading...