7
1 2 3
4 5 6
1) The headlight, which is provided as a gift in the box, is not installed on the car.
2) Please take out the headlight, the zip ties, and the adhesive tape from the box.
(See Photo 1)
3) Please plug the headlight plug into the slot on the ESC/Receiver. (See Photo 2).
Note: Do not force while plugging or unplugging.
4) Please apply the adhesive tape to the headlight board and stick it on the upper deck
as shown in Photo 3.
5) Gently insert the headlights into the slots on the back of the front bumper. Make sure they
are in place.(See Photo 4 and Photo 5)
6) Please keep the wires in order and bind them up with the aid of the zip ties. (See Photo 6)
Headlight Installation
!
Cautions
To Next Page
Loading...
