To Next Page
K
kbryanJul 30, 2025
What to do if my BLADEZ Treadmill shows error E1?
- CCurtis MoraJul 30, 2025
If the BLADEZ Treadmill displays error code E1, it could be due to several reasons. First, check the speed sensor connection. It may also indicate that the running deck is not lubricated or the speed sensor is misaligned, so check the R-Deck oil and sensor position. Other potential causes include a faulty speed sensor (replace the S-Sensor), a loose display cable (check the display cable connection), a faulty MCB (replace the MCB if the D2 LED is on), a disconnected drive motor (check the D-Motor connection), or a faulty drive motor (replace the D-Motor).
General
