Blanco 10 1-3/4 Bowl with 15' Drainboard 513-694 User Manual

SINK SPECIFICATIONS
BLANCO STEELART
BLANCOPRECISION™ 10 1-3/4 BOWL With 15" Drainboard
Model 513-694
FEATURED MODEL
513-694 10" and 10" bowl depths
ADDITIONAL MODELS
513-688 1-3/4 Bowl without Drainboard
515-821 1-3/4 16" Bowl without Drainboard
FEATURES
• 18 gauge, 304 series stainless steel
• 18/10 chrome/nickel content
• Handcrafted from a single panel of stainless steel
• 10mm radius corners
• Elegant and functional drain grooves
• Long-lasting, easy-to-clean, satin polish finish
• Sound-deadening insulation
• Rear drain placement
CODE/STANDARDS COMPLIANCE
ASME 112.19.3-00
IAPMO/UPC listed
OPTIONAL ACCESSORIES
Sink Grids: 221-015, 221-016, 221-024
Colanders: 218-772, 215-651
Cutting Board: 218-620
WARRANTY
Blanco America’s BLANCOPRECISION™ 10 sinks
feature a LIMITED LIFETIME WARRANTY to be free of
all manufacturing defects under normal use. See our
complete warranty for details.
While Blanco America endeavors to provide accurate
information, all dimensions are nominal, cannot be
guaranteed, and are subject to change or cancellation.
Blanco America assumes no responsibility for use of
superseded or voided specifications.
© 2008 BLANCO AMERICA
06/08 SPEC-003
MODEL 513-694
BLANCO AMERICA
800.451.5782
www.blancoamerica.com
PRODUCT SPECIFICATION
Undermount sink to be 48" in length and 20"
in front-to-back depth. Sink to be handcrafted
from a single panel of 18 gauge, 304 series
stainless steel, with 18/10 chrome/nickel
content and satin polished finish. Sink to
feature 10mm radius corners, rear drain
placement and integral drainboard. Sink to be
Blanco Model 513-694, with left bowl depth of
10" and right bowl depth of 10".
JOB INFORMATION
Job Name:
Contact:
Date Specified:
Specifier:
Contractor:
NOMINAL DIMENSIONS
BOWL DEPTH DRAIN
MODEL OVERALL LEFT RIGHT DIAMETER
513-694 48 x 20 10 10 3-1/2
DXF cutout templates available on our web site.

Blanco 10 1-3/4 Bowl with 15' Drainboard 513-694 Specifications

General

Product Type	Kitchen Sink
Number of Bowls	2
Drainboard	Yes
Model Number	513-694
Material	Stainless Steel
Bowl Quantity	2
Mounting Type	Drop-in
Finish	Satin
Drainboard Length	15 inches
Overall Height	8 inches
Bowl Configuration	1-3/4 Bowl
Overall Width	20 in

Summary

Featured Models

Model 513-694

Features 10" and 10" bowl depths for the featured sink model.

Model 513-688

1-3/4 Bowl without Drainboard, an additional sink model.

Model 515-821

1-3/4 16" Bowl without Drainboard, another sink model option.

Product Specifications

Undermount Sink Details

Describes an undermount sink, 48" length, 20" depth, 18 gauge 304 stainless steel.

Sink Features

Highlights features like 18/10 chrome/nickel, satin polish, radius corners, rear drain, drainboard.

Nominal Dimensions

Overall Dimensions

Specifies the overall sink dimensions as 48 x 20 inches.

Bowl Depth and Drain

Details bowl depths (Left 10", Right 10") and drain diameter (3-1/2").

Warranty Information

Limited Lifetime Warranty

States a LIMITED LIFETIME WARRANTY against manufacturing defects under normal use.

Disclaimer on Dimensions

Notes that dimensions are nominal, not guaranteed, and subject to change.