30
INSTRUCTIONS FOR THE INSTALLER
MAINTENANCE
Prior to any maintenance work or changing
parts, disconnect the appliance from
the gas and electricity power sources.
Servicing must only be carried out by
authorised personnel.
REPLACING THE TAPS
Proceed in the following way when replacing a
(four for ultrarapid burner and two for the other
burners)
at the supports (S).
pipes and pull out the thermocouple quick
crosspieces.l
the the bridles of the taps to the front frame.
the taps.
is replaced. This will ensure perfect retention
between the tap or a thermostat and part.
procedure but in the reverse order.
22
23
24
To Next Page
Loading...
