To Next PageTo Next Page
Need help?Do you have a question about the Blasi C 127 SU S and is the answer not in the manual?
General| Brand | Blasi |
|---|---|
| Model | C 127 SU S |
| Category | Door Opening System |
| Language | English |
Details intended applications and risks of misuse.
Covers general safety measures and accident prevention.
Graph and formula for door leaf weight and width calculations.
Illustrated breakdown of the operator's components.
Lists and describes the main components of the operator system.
Explains the automatic and lock modes of operation.
Diagram showing installation dimensions with a floor box.
Diagrams showing the overall dimensions of the operator unit.
Describes jumpers, LEDs, and the key (S1) on the STG 127 control unit.
Details the BDE-D controller for adjustment and operation.
Explains signal reactions in Automatic and One-way traffic modes.
How to operate the door manually, ignoring actuators.
Describes the mode where the door stays open.
Details the locked operation mode.
Procedure for resetting the operator via the display.
Overview table of system parameters and their factory settings.
Detailed description of parameters, setting ranges, and defaults.
General statement on the operator's technology and maintenance.
Instructions for cleaning the swing door system.
Recommendations for periodic technical safety tests and servicing.
Requirements for testing and maintenance of hold-open systems.
Contact information for service centres.
Explains how faults are indicated using the BDE-D controller.
Details error displays, numbering, and how to browse them.
Lists common error messages, their meanings, and troubleshooting steps.
Procedure for discontinuing the operator from service.
Guidelines for sorting and disposing of machine parts by material type.
Technical drawing and dimensions of the standard arm SG.
Technical drawing and dimensions of the sliding arm GG.
