Transportation
When transporting the BP-9-1 10V shot blasting machine, it is strongly recommended that
personnel act in a manner so as to reduce the potential that damage takes place as a result of using
excessive force or of using incorrect loading and unloading procedures. Before
transportation, the BP-9-1 10V should be separated into machine, filter unit, and general
accessories. Note: Personnel must remove any shot from the machine before it is
transported. Also, the machine may only be lifted by using the suspension eyelets; forklifts
should never to be used to transport the BP-9-1 10V shot blasting machine.
To Next Page
Loading...