Need help?Do you have a question about the Blastrac BDC-33-230V-P and is the answer not in the manual?
Essential to read instructions before starting device for safe operation.
Suitable for commercial use in hotels, schools, factories, and other non-domestic purposes.
Forbidden uses: outdoor operation, wet conditions, using without installed filters, or with clogged vents.
Ensure voltage rating matches mains before plugging in; use grounded socket.
Disconnect power before servicing; perform only described maintenance; use original spare parts.
Details parameters like voltage, power rating, noise level, dimensions, and filter specifications.
Check filter, latches, hose, and tools are correctly fitted before operation.
Use main switch and start/stop buttons for safe power control and operation.
Turn the main switch to the '0' position to immediately stop the vacuum cleaner.
Instructions for fastening the hopper and inserting/removing the Longopac bag.
Handle contaminated filters with care, seal in bag, and dispose according to laws.
Precautions for replacing HEPA filter: avoid dust, use P3 mask and protective clothing.
Periodically clean fan to prevent motor overheating, especially in dusty environments.
Step-by-step guide for installing the Longopac bag system on the vacuum cleaner.
Procedure for safely removing the vacuum hose and storing it away from dust.
General| Model | BDC-33-230V-P |
|---|---|
| Category | Vacuum Cleaner |
| Voltage | 230 V |
| Filter Type | HEPA Filter |
| Tank Capacity | 33 L |
| Vacuum Pressure | 25 kPa |
To Next Page
