Why is my Blastrac Cleaning Equipment vibrating excessively?
Excessive vibration in your Blastrac Cleaning Equipment can stem from several causes: worn or broken tools creating imbalance (replace all worn or broken parts), a defective bearing (check and replace if necessary), incorrect belt tension (check and replace the belt if needed), or a defective motor (replace the motor).
What to do if the motor triggers while running on my Blastrac BMP-265?
If the motor in your Blastrac Cleaning Equipment triggers while running, it could be due to motor protections being activated by an overload (reduce the additional load). Another possible reason is a defect in the motor itself, so you should check the motor.
What to do if the motor does not switch on in my Blastrac BMP-265?
If the motor on your Blastrac Cleaning Equipment isn't switching on, it might be due to a missed phase in the mains power supply (check the power supply and try again). Alternatively, a component may be defective (find the faulty component and replace it).
Lists available cutters and drums for the BMP-265.
Guidelines for safe working environment and conditions.
Personal protective equipment and conduct for operators.
General safety checks and rules for the machine itself.
Safety measures related to the machine's electrical system.
Specific safety instructions for the petrol engine model.
Safety guidelines for using the dust collection system.
Safety precautions during maintenance and repair.
Procedures and precautions for transporting the machine.
Explanation of safety labels and symbols on the machine.
Verification of the electrical power supply before operation.
Checks required for the petrol engine before starting.
Pre-operation checks for the machine's components.
Instructions for manually moving the machine.
Procedure for safely removing the scarifying drum.
Steps for correctly installing the scarifying drum.
Details on the scarifying drum assembly and components.
Information on different types of scarifying tools.
Description and function of the machine's control elements.
Pre-start checks before operating the machine.
Step-by-step guide to starting the scarifying process.
Guidance on how to operate the machine during scarifying.
Steps for safely shutting down the machine.
Maintenance and repair of the scarifying drum.
How to adjust the brake pressure for optimal performance.
Information on belt drive tension and maintenance.
General| Frequency | 50/60 Hz |
|---|---|
| Dust Extraction | Yes |
| Motor Power | 2.2 kW |
| Voltage | 230 V |
| Noise Level | 85 dB(A) |
To Next Page
