Blaufoss SWITCH-LINE - User Manual

Installation guide
Montageanleitung
Installatiegids
Guide d’installation
201378_INSTALL_INT_ver2024.1.2
SWITCH-LINE - themostatic built-in shower mixer
SWITCH-LINE - thermostatische inbouw douchekraan
SWITCH-LINE - thermostat de douche encastré
SWITCH-LINE - Unterputz Thermostat-Duscharmatur
14170
170
30
Parts list
Lijst van onderdelen
Liste des piéces
Teile
0
Be careful. Hard contact can damage the surface layer. Damage to the
surface resulting from incorrect or careless manipulation is not covered
by the warranty
Wees voorzichtig. Hard contact kan de oppervlakte laag beschadigen.
Beschadigingen van het oppervlak die het gevolg zijn van verkeerde of
onvoorzichtige manipulatie vallen niet onder de garantie
Faites attention. Un contact dur peut endommager la couche de
surface. Les dommages à la surface résultant d’une manipulation
incorrecte ou imprudente ne sont pas couverts par la garantie
Achtung. Harter Kontakt kann die Oberächenschicht beschädigen.
Schäden an der Oberäche, die durch falsche oder unachtsame
Manipulationen entstehen, fallen nicht unter die Garantie

Summary

Blaufoss SWITCH-LINE Installation Guide

Parts List and Components

Overview of all included parts for the shower mixer installation.

Surface Damage Precaution

Warning against hard contact that can damage the surface layer.

Smartbox Installation Depth

Wall Finish and Depth Requirements

Details on wall finish thickness and required depth for proper installation.

Minimum Depth Measurement Diagram

Visual guide for measuring the minimum installation depth.

Installation Steps - Part 1

Pipe Flushing and Initial Connections

Flushing pipes and connecting the initial water supply lines to the mixer body.

Mounting the Mixer Body

Securing the mixer body within the wall and connecting pipes.

Installation Steps - Part 2

Leak Testing and Final Pipework

Checking for leaks and completing all pipe connections.

Waterproofing and Finishing

Applying waterproof plaster and completing the wall finish.

Mixer Installation Procedure

Initial Mixer Assembly

Shutting off water, assembling mixer components, and preparing for wall mounting.

Securing and Fitting the Mixer

Cutting wall openings and securely fitting the mixer into the wall recess.

Mixer Fine-Tuning and Testing

Mixer Adjustment and Testing

Adjusting mixer position, testing for leaks, and verifying functionality.

Temperature Setting and Final Assembly

Setting desired temperature and completing the final trim and control assembly.

Maintenance and Warranty

Maintenance Advice

Guidelines for cleaning and caring for the faucet to prevent damage.

Warranty Conditions

Information on warranty coverage, limitations, and claims.

Blaufoss SWITCH-LINE Specifications

General

Brand	Blaufoss
Model	SWITCH-LINE
Category	Plumbing Product
Language	English