Blaupunkt 131J-GB-1B-3HCU-UK - Attaching the Stand

9
Attaching the stand for 32-131 models only
To complete the stand installation you will need a Phillips screw driver.
Place the TV set on a  at and clean surface with the panel facing downwards to avoid damage.
( g.1) Attach the stand neck to the rear of the TV set. ( g.2) Secure the neck to the TV using the 4 x ST(4x16)
screws provided.
( g.3) Attach the stand base to the neck. ( g.4) Secure the base to the neck using the 6 x ST(4x16)
screws provided.
1
4 x ST(4x14)
2
11 /2
3
4
ST(4x16)
4 x ST(4x14)
ST(4x16)
/(4x14)
/(4x14)
UserGuide - 32-131J-GB-1B-3HCU-UK, 42-131J-GB-1B-F3HCU-UK.indd 9UserGuide - 32-131J-GB-1B-3HCU-UK, 42-131J-GB-1B-F3HCU-UK.indd 9 6/17/2013 9:51:45 AM6/17/2013 9:51:45 AM