17
TV Menu Operation
PICTURE MENU
Picture Mode - Choose from the following presets:
Standard Standard settings
Dynamic Recommended settings for fast moving pictures
Movie Set to be lighter in colour and less bright
Economy Power saving mode which reduces the energy used by up to
25% (by reducing the power to the LED/LCD panel).
You can make the following adjustments in each picture mode:
BackLight - (for Standard and Movie modes only) Increase or decrease the backlight of the picture
Contrast - Switch the balance between black and white
Brightness - Increase or decrease the brightness of the picture
Saturation- Increases or decreases the colour of the picture
Tint - Lets you increase or decrease the level of tint within the picture when available
Sharpness - Increase or decrease the sharpness of the picture
Colour Temperature Choose from the following presets:
Normal Default settings
Warm Increases red within the picture
Cold Increases blue within the picture
16.9 Overscan - Select the screen area displaying the image. When ‘on’ is selected, enlarge the image to
hide the edge of the image.
To access the menu, press [MENU] button on the remote control. To select a sub menu press [OK].
If you wish to make changes to any of the default settings, use the scroll buttons.
To confi rm any settings press [OK] button.
To exit the menu at anytime, press [MENU] button. To go back a previous step press [EXiT] button.
User Guide - 32-152R-GB-3B-GKU - BLA-MAN-0261.indd Sec1:17User Guide - 32-152R-GB-3B-GKU - BLA-MAN-0261.indd Sec1:17 25/02/2015 11:05:5625/02/2015 11:05:56
To Next Page
Loading...
