Blaupunkt 382131 - ELECTRICAL INFORMATION; WIRING INSTRUCTIONS

7
2-CORE PLUG
Live
(Brown)
Earth
(Green &
Yellow)
Neutral
(Blue)
Neutral
(Blue)
Live
(Brown)
WARNING: Do not connect either
wire to the earth terminal.
This symbol indicates that this 2-core
appliance is Class II and does not
require an earth connection.
The wire coloured blue must be
connected to the terminal marked with
the letter N or coloured black.
The wire coloured brown must be
connected to the terminal marked with
the letter L or coloured red.
3-CORE PLUG
WARNING: This appliance must
be earthed.
The wire coloured green and yellow
must be connected to the terminal
marked with the letter E, or by the
earth symbol, or coloured green or
green and yellow.
The wire coloured blue must be
connected to the terminal marked with
the letter N or coloured black.
The wire coloured brown must be
connected to the terminal marked with
the letter L or coloured red.
(Fixed Mains Plug Only)
The mains lead supplied with this product is tted with a BS1363/A 13 amp plug. If it is not suitable for your
supply sockets it must be replaced with an appropriate plug.
If the plug becomes damaged and/or needs to be replaced please follow the wiring instructions on the next
page. The plug removed must be disposed of immediately. It must not be plugged into a supply socket as this
will be an electrical hazard.
If the fuse needs to be replaced it must be of the same rating as the one tted and ASTA approved to BS1362. If
the plug is changed, a fuse of the appropriate rating must be tted in the plug, adapter or at the distribution
board. If the fuse in a moulded plug is replaced, the fuse cover must be retted before the application can be
used.
ELECTRICAL INFORMATION
The supply cable will be either 2-core or 3-core. Follow the appropriate wiring instructions shown. In both cases
ensure that the outer sheath of the cable is held rmly in place by the cable clamp.
WIRING INSTRUCTIONS