Blaupunkt ALICANTE CD32 - Random Play (MIX); Scanning All Tracks on All Cds (SCAN); Pausing Playback (PAUSE)

41
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Cancelling REPEAT
To stop the current track or current CD
from being repeated,
➮ keep pressing button 4 (RPT) :
until “RPT OFF” appears in the dis-
play and RPT disappears.
Random play (MIX)
To play the tracks on the current CD in
random order,
➮ briefly press button 5 (MIX) :.
“MIX CD” appears briefly and MIX lights
up in the display.
To play the tracks on all inserted CDs in
random order,
➮ press button 5 (MIX) : again.
“MIX ALL” appears briefly and MIX lights
up in the display.
Cancelling MIX
To stop the tracks from being played in
random order,
➮ keep pressing button 5 (MIX) :
until “ MIX OFF” appears in the dis-
play and MIX disappears.
Scanning all tracks on all CDs
(SCAN)
To scan all the tracks on all inserted CDs
in ascending order,
➮ hold down the MENU button 7 for
longer than two seconds.
“SCAN” appears in the display.
Stopping SCAN
To stop scanning,
➮ briefly press the MENU button 7
again.
The currently scanned track will then
continue to be played.
Note:
● You can set the scantime. For fur-
ther details, read the section enti-
tled “Setting the scantime” in the
“Radio mode” chapter.
Pausing playback (PAUSE)
➮ Press button 3 ( ) :.
“PAUSE” appears in the display.
Cancelling pause
➮ Press button 3 ( ) : while in
pause mode.
Playback is continued.
CD CHANGER MODE