35
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Telephone audio
(Alicante CD34)
If your car sound system is connected
to a mobile telephone, the sound sys-
tem’s volume will be muted as soon as
you “pick up” the telephone. The tele-
phone call is then outputted over the car
sound system’s loudspeakers. This re-
quires that the mobile telephone be con-
nected to the car sound system as de-
scribed in the installation instructions.
You will need a cable for this with the
following Blaupunkt number: 7 607 001
503.
If the sound system receives a traffic
announcement during a telephone call,
the system will only play the traffic an-
nouncement after you have finished the
call.
You can set the volume at which you
want telephone calls to be initially heard.
➮ Press the MENU button 9.
➮ Press the or button 8 re-
peatedly until “TEL VOL” appears
in the display.
➮ Set your preferred volume level us-
ing the
buttons 8.
When you have finished making your
changes,
➮ press the MENU button 9 twice.
Note:
● You can use the volume control 4
to adjust the volume of a telephone
call whilst the call is being output-
ted by the sound system.
Radio mode
This device is equipped with an RDS
radio receiver. Many of the receivable
FM stations broadcast a signal that not
only carries the programme but also
additional information such as the sta-
tion name and programme type (PTY).
The station name appears in the dis-
play as soon as the tuner receives it.
Switching to radio mode
If you are in CD, CD changer or AUX
mode,
➮ press the BND•TS button 3.
or
➮ press the SRC ( ) button 7 re-
peatedly until the memory bank
(e.g. “FM1”) appears in the display.
Convenient RDS functions
The convenient RDS functions AF (Al-
ternative Frequency) and REGIONAL
extend your radio’s range of functions.
● AF: If you activate this RDS func-
tion, the radio automatically tunes
into the best receivable frequency
for the station that is currently set.
● REGIONAL: At certain times, some
radio stations divide their pro-
gramme into regional programmes
providing different content. You can
use the REGIONAL function to pre-
vent the car radio from switching to
alternative frequencies that are
transmitting different programme
content.
RADIO MODE
ADJUSTING THE VOLUME
To Next Page
Loading...
