Switching the confirmation beep
on/off
The system will output a confirmation beep
for some functions if you keep a button
pressed down for longer than two seconds,
for instance, when assigning a radio station
to a station preset button. You can switch
the beep on or off.
Press the
MENU button 9.
Press the
or button : repeatedly
until "BEEP ON" or "BEEP OFF" appears
on the display.
Switch the BEEP ON or OFF with the
or button :.
When you have finished making your chang
-
es,
press the
MENU button 9.
Automatic Sound
This function automatically adjusts the vol-
ume of the car sound system to the vehicle
speed. For this purpose, the car sound sys
-
tem must be connected as described in the
installation instructions.
You can adjust the automatic sound in 6 in
-
crements from (0 - 5).
Press the
MENU button 9.
Press the
or button : repeat-
edly until "AUTO SD" appears on the
display.
Set the automatic sound 0 - 5 with the
or button :.
When you have finished making your chang
-
es,
press the
MENU button twice 9.
Note:
Your optimal setting of 0 - 5 of the
speed-dependent sound adjustment
depends upon the driving noise devel
-
opment of your vehicle. Determine the
perfect value for your vehicle using trial
and error.
Volume
To Next Page
Loading...
