Blaupunkt Antares T60 - Displaying Call Charges;Time; Resetting the Counter; Setting the Charges, Time Display During a Call

26
Displaying call charges/time
If this function is supported by your service
provider, you can display the call time and
the charges for the last call and for all calls.
➮ In the telephone mode, press OK.
The DSC menu will appear in the display. The
cursor
will mark Setup .
➮ Press to select Menu .
➮ Press OK.
➮ Press to select Call meters .
➮ Press OK.
The
CALL METERS menu will appear in the
display.
➮ Press to select the option for display-
ing the last calls or all calls.
➮ Press OK.
The desired information will appear in the dis-
play.
➮ If you want to return to the previous
menu, press OK.
Resetting the counter
➮ In the CALL METERS menu, select the
menu item
Reset .
➮ Use the 0 - 9 keypad to enter the Radio-
phone access code.
You will return to the
CALL METERS menu.
➮ Press CLR repeatedly until you return
to the main menu or press and hold
down CLR for longer than one second
to return to the DSC menu.
Setting the Charges, Time display during
a call
During a call, you can have either the current
charges or the elapsed call time displayed.
➮ In the CALL METERS menu, select the
menu item
During call .
The
SHOW DURING CALL menu will appear
in the display.
➮ Press OK.
➮ Press to select the desired setting for
Charge or Time .
➮ Press OK.
You will return to the CALL METERS menu.
➮ Press OK.
➮ Press CLR repeatedly until you return
to the main menu or press and hold
down CLR for longer than one second
to return to the DSC menu.
TELEPHONE SETTINGS