B 3e / B 4e
USB OPERATION (function only available in B 4e)
1. Set the FUNCTION button to “CD/MP3/USB” position, press and hold the STOP/USB
button for about 2 seconds to enter the USB mode.
2. Connect the USB device to the USB INPUT. The LCD will show the total number of tracks
stored in the USB device. The unit will start playback from track 1 after reading finished.
3. Press PLAY/PAUSE/STANDBY button to pause and resume playback.
4. Press the STOP/USB button to stop playing. The display will show the total number of
songs which are stored in the USB device and then it stops playing.
5. For repeat play (repeat 1- repeat folder - repeat all)/program play/skip next and back
operation proceed as described above in “CD/MP3 OPERATION”.
CAUTION:
Do not use any USB extension cable for connecting the USB device to avoid any conflict.
Headphones (function only available in B 4e)
For private listening, plug the headphones/earphones (not included) into EARPHONE
JACK (3.5 mm diameter).
CAUTION: Long time listening with headphones/earphones at high volumes may cause
harmful damage to users’ ears.
MP3 Link Operation (function only available in B 3e)
B 3e has a MP3 LINK JACK. Through this jack other audio sources can be connected to this
unit and be amplified.
1.Set the FUNCTION switch to CD/MP3/MP3 LINK position.
2.Connect the audio cable into the MP3 LINK jack and connect the other end to the AUDIO
OUT jack of the external audio source. The unit will change to MP3 LINK mode
automatically.
3.Adjust the volume of the main unit to your desired level. Press PLAY of the external
audio source (eg.MP3 player) to start playback.
45
To Next Page
Loading...
Need help?
General
