28
EN
Feature
Lock - Allows you to lock or unlock the menu. You will be
asked to enter a 4 digit password. Use the ◄ button o quit the
password input. Use the ► button to clear. Default password
is 0000.
Lock channel - Lock speci c TV channels.
Parental Guidance - Lock TV channels based on age
restriction
Change Pin Code - Change the default password.
Language - Language setting.
OSD Language - Allows you to change the language of the
menu.
Preferred subtitle - Allows you to set prefered subtitles
language on selected DVB channels.
Preferred Languages - Allows you to set prefered audio
language on selected DVB channels.
DTV Teletext Language - Allows you to set prefered teletext
language on selected DVB channels.
ATV Teletext Language - Encoding settings for the proper
display of teletext characters.
Clock - Set the date and time. Date and time is set up
automatically in DVB mode.
Sleep Timer - Lets you set the sleep timer so the television
automatically switches o after a set amount of time. O ->
10min -> 20min -> 30min -> 60min -> 90min -> 120min ->
180min -> 240min.
Auto Power O - Adjustment for the auto standby in hourly
increments: O -> 1h -> 2h -> 4h.
Hearing Impaired - If signal provides support for the hearing
impaired, the subtitles can be displayed by pressing the
“Subtitle”. If you set Hearing Impaired ON and switch to a
channel with supports for hearing impaired subtitles will be
activated automatically.
CI Info - Pay per view services require a “smartcard” to be
inserted into the TV. If you subscribe to a pay per view service
the provider will issue you with a ‘CAM’ and a “smartcard”. The
CAM can then be inserted into the COMMON INTERFACE PORT
(CI Card In).
PVR/ Timeshift* - PVR Recording options
Partition select- Select disk partition for recording.
Auto Timeshift - Automatic recording of DVB channels.
(aviable only with USB memory stick)
TimeShift Bu er - Set how far you want to be able to rewind
recorded TV channel
Timer - Set the time date and channels for recording.
Record List - List of recorded channels.
Recorder Start - Starts recording currently viewed channel.
Setup
OSD Timer - Lets you adjust the amount of time the On Screen
Menu stays on the screen before disappearing.
Timer 3D*** - Display 3D warning after set time.
Auto Scart - Turn on/o the Autoscart function.
PC Setup - Using TV as a PC monitor settings adjustment.
Auto Adjust - Lets you automatically con gure the television
to be used as a computer monitor.
H position - Changes the horizontal position of the picture.
V position - Changes the vertical position of the picture.
Phase - To adjust delay time of phase in order to reduce the
noise of picture
Clock - increase picture size
Blue Screen - Changes the background when there is no input
between transparent and a blue background (Only available on
some sources).
Reset TV Setting - This resets the menus to factory settings.
Software Upgrade - From time to time we may release new
rmware to improve the operation of the television (available
to download). This menu lets you install the new software/
rmware onto the television. Further details of how to do this
will be issued with the rmware. Contact the helpline or refer to
the ‘www.umc-slovakia.sk/products-support/’ website.
Version - TV rmvare and hardrware con guration informations.
Load Default Database** - Loads preinstaled DVB-S Channel
list
TV Menu operation
* - Only for models with PVR Function
** - Only for models with DVB-S Tuner
*** - Only for models with 3D function
To Next Page
Loading...
