5
Location of controls
1. Volume/LED knob
2. Speaker
3. Timer
4. Program/ clock set
5. EQ(nomal/rock/POPS/Jazz/classic)
6. Power/ Source
7. +10/ preset
8. CD door
9. LCD display
10. Scan/ Repeat( repeat one/repeat all/random)
11. Play/pause, pairing
12. Previous , next
13. stop/mono stereo
14. Tuning knob
15. Aux-in jack
16. Earphone jack
17. USB port
18. SD/MMC card slot
19. FM Antenna
20. AC socket
21. Battery compartment
22. LED ON/OFF
Power source and connection
AC operation: using the supplied power cable connect the AC port on the rear panel of unit, then Insert the power plug into the
household AC wall-mount socket in order get the power source.
DC operation(battery power): open the battery door and insert 8pcs x UM1/1.5V batteries(not include) according to the
engraved positive and negative polarity symbol. Then recover the battery door.The display will light up after power connection
successful. Press the power/source button to switch the play mode, press and hold the power/souce button 2 seconds to power
off(standby mode) the unit. The batteries power will be disconnected automatically once AC power is available.
Notes:
a. The sound will become distortion due to low or exhausted battery power, please replace it with fresh battery. Please disposal
the battery in environmental friendly way, please reference and follow the requirement by your local government.
b. Please do not install the battery with mix up brand; please take out the battery in case of no operation in a long time to avoid
liquid leakage issue.
To Next Page
Loading...
Need help?
General
