6
PRODUCT INFORMATION
Filter cover
Wall,
Anti-collision,
Infrared recharging
sensors
Mop cloth
assembly
Main brush
Main brush
cover
Side wheel
Side wheel
Battery
Cli sensor
Universal
wheel
Charging
electrode tip
Reset button
Press and hold for 1 second to restart.
Press and hold for 3 seconds to
restore the factorys settings.
Wall-following
position sensor
Dustbin release
button
Side brush
Cli sensor
TOP & FRONT BOTTOM
SIDE
Dustbin button
Infrared lens
Suction inlet
Display
Dustbag chamber
Charging and dust
collection sensor
Upper cover
Open the upper cover,
Install/remove dust bag.
If the dust bag is full, the light will be
bright. If the dust bag is not installed
correctly, the light will ash
In the dust collection, the lamp is
bright and ashing.
Full power two grid green long light,
when less than or equal to 50%, a grid
green long light.
Anti-collision sensor for radar
LDS laser ranging sensor
Cleaning on&o
Charging/local cleaning
Indicator light
To Next Page
Loading...
