APP
INSTRUCTION XPOWER+
Make sure the robot is
fully charged.
It is not possible to register
the robot in the app while it is
physically in
the docking station.
Remove the robot from
the docking station (charger).
Place the robot close to your
router.
2 31
If you have already completed the following procedure, reset the robot vacuum by setting the
red switch on the side of the robot to ‘off’ for at least ten minutes.
Need assistance?
bluebotxpower.com blaupunktrobotics-de@teknihall.de
00800 357 00 753
To Next Page
Need help?
General
