Blaupunkt Bluebot Xtreme User Manual

Robot Mopping module
INSTALLATION
Robot installation
Starting up and charging
Please charge the robot on the charging base and the machine
will start automatically. The machine can only work normally
when the battery level is ≥20%. Long press to switch on the
robot.
Start cleaning
After the robot is powered on, short press key on the robot
or use the mobile APP to start cleaning (press any button to
pause during use).
• The sweeping robot cannot be used to remove liquids.
• If the battery level is less than 20%, the machine will
not work. Please charge it.
• The machine will return to the charging base
automatically if the battery level is less than 20% when
in use and will be powered off and then start cleaning
automatically after the battery level reaches 80%.
• Please clear various wires (including the power line
of the charging base) from the ground before use to
avoid outage and damage of objects or wires when
wires are dragged by the robot.

Blaupunkt Bluebot Xtreme Specifications

General

Noise level	70 dB
Wet mopping	Yes
Navigation type	Mapping
Number of brushes	2
Integrated sensors	Accelerometer, Gyroscope
Water tank capacity	0.35 L
Dust capacity (total)	0.6 L
Vacuum cleaner programs	Turbo
Floor surfaces supported	Carpet, Hard floor
Number of suction levels	3
Dust capacity (vacuum cleaner)	0.3 L
Filter type	HEPA
Battery type	AA
Suction power	3000 Pa
Charging time	5 h
AC input voltage	100-240 V
Battery capacity	5000 mAh
Shape	Round
Product color	Black
Housing material	Tempered glass
Dust container type	Bagless

Weight and Dimensions

Width	350 mm
Height	100 mm
Weight	3350 g