Choose a starting point
for your cleaning process
Adjustment of
suction power
More options
Draw your own area
in the map to clean
Start / Pause
The robot will drive back to
it’s charging base
Set Wall
APP INSTRUCTIONS
More options
Timer
Set a timer to program the robot to clean at
a certain time or day.
Manual
Control the robot manually and use your
phone as a remote control.
Find robot
Tap this button when you lost your robot
and your robot will tell you where it is.
Reset map
Use this function to erase your current map.
Water regulation
Control the water regulation and choose
“Low”, “Medium” or “High”. This will regulate
how wet the mop will become when using
the robot including the 2 in 1 electric-
controlled water tank.
Auto Boost
Auto Boost will increase suction power
when the robot gets more friction. This is
designed to increase suction on carpets.
Custom mode
So the robot can remember per area what
route to use for cleaning.
Record
View all your previous vacuum cleaning
records. You can see how many m2 has
been cleaned and the time it took. Here
you can also load previously saved maps.
Ideal when cleaning different area’s (upper
floor for instance).
Voice and volume
Setup your language and change the
volume.
Do not disturb mode
Here you can schedule an do not disturb
time period.
Consumables and maintenance
Here you will find an overview of
consumables and indicates when
consumables need to be replaced or
maintenance is required.
More info
Here you will find network and robot
information
Set wall / Resctricted Area
Use this function to create no-go zones
within the area that you are cleaning. You
can draw virtual walls that blocks the robot
from crossing. Or you create a restricted
area for either vacuuming or mopping.
To Next Page
Loading...
