Rolling Brush Side brush
Dust bin Filter cover cleaning
Filter cleaning
Mopping module
2 in 1 electrically-controlled water tank
Sensors
Regular cleaning
Sensors
Monthly cleaning
Battery Firmware upgrade
System reset
DAILY MAINTENANCE
Sensor | Regulary cleaning
Clean the sensors with a soft, dry mop, including:
1. Three anti-dropping sensors at the bottom of the robot.
2. Electric shock protector and the pins to connect with the
charging base at the bottom of the robot (please cut the power
off during cleaning)
3. Signal transmission area of charging base.
Clean it regularly
Charging contact
Anti-drop sensor
To Next Page
Loading...
