Blaupunkt BP-GIK03 - Operation; Troubleshooting

BP-GIK03
3
ENGLISH
4. Operation
4.1. Introduction
This insect killer uses a UV light to attract ying insects. The fan will suck these insects into the container and
dry them. This insect killer does not produce any noisy electric shocks nor does it emit any toxins, smoke, scent
or radiation.
This insect killer is designed to be used outdoors (garden, terrace…).
4.2. How to Use
1. Install the insect killer on a stable and non-slippery surface or hang on a height of 50-100cm above the
ground.
2. Connect the insect killer to the power source.
3. Disconnect from the power supply after use.
For best results, turn o other light sources and prevent from installing the appliance in the draught.
5. Troubleshooting
Problem Reason Possible solution
Appliance does not start
Power supply not connected well Reconnect the power supply
On-o button not pressed Press the on-o button
Appliance does not light
Power supply not connected well Reconnect the power supply
Light is damaged
Light source cannot be replaced;
scrap the appliance
PCB board is damaged
PCB Board cannot be replaced; scrap
the appliance
Noisy fan Foreign objects in the fan Clean the fan
6. Care and Maintenance
Storage
Store the appliance and its accessories in a clean and dry area.
Cleaning
The cleaning frequency depends on the intensity of use. Check the tray of the device at least once a week.
Clean more often if necessary.
Before starting any cleaning or maintenance activities, unplug the appliance from its power source, wait for
5minutes and let it cool down.
BP-GIK03.indd 3 09/09/2019 11:05:40