BP-GIKLED09
5
Keep the insect killer working for more than 12 hours at first use.
Do not open the container during use. Make sure the insects are
dried to death to prevent them from escaping.
Keep the insect killer working for 3 hours before going to sleep.
Make sure to keep windows and doors closed.
5.2 How to Use
1. Connect the insect killer to a 5 V power supply. Install the
insect killer in a dry location on a stable and non-slippery
surface.
2. Select the silent or strong mode. Press the button to start
the insect killer.
3. Press the same button to stop the insect killer. Disconnect
from the power supply after use.
For best results, turn off other light sources and prevent from
installing the appliance in the draught.
6. Troubleshooting
Problem Reason Possible solution
Appliance does not
start
Power supply not
connected well
Reconnect the
power supply
On-off button not
pressed
Press the on-off
button
Appliance does not
light
Power supply not
connected well
Reconnect the
power supply
Light is damaged
Light source
cannot be
replaced; scrap the
appliance
PCB board is
damaged
PCB Board cannot
be replaced; scrap
the appliance
Noisy fan
Foreign objects in
the fan
Clean the fan
To Next Page
Loading...
