8
Install the stand as described below, or if you want to mount it to a wall, please contact a
professional installer.
Please ensure the TV is not plugged into the wall socket and furthermore we recommend
to get another person to assist in the following task.
Attaching the stand
Step 1
Place a soft cushioned material on top of a flat surface to prevent damaging the screen
panel. Then place the TV screen flat on top, with the screen side facing down, as
illustrated on the right.
Step 2
Align the stand leg to the installation point, as illustrated below.
Step 3
Tighten the screws (supplied) with a screwdriver to ax the stand to the panel, as
illustrated on the right.
CAUTION!
Do not apply excessive force as this may damage the screw holes.
INSTALLATION
To Next Page
Loading...
Need help?
General
