28
TV - CHANNEL/TUNING MENU
Make sure before scanning for any TV/Programs that you are on the DTV-T/T2
SOURCE INPUT.
To do this make sure you are on LIVE TV app ( Refer to page 21 - #9 ).
1. Press SOURCE on your remote control.
2. Make sure to select DTV-T/T2.
Note: on any other source such as ATV or DVB-C, scanning for channel
will NOT WORK.
To access CHANNEL menu, while watching LIVE TV:
1. Press the MENU button on the remote control and select “MORE”.
(refer to page 20 Menu Settings).
2. Select TV.
3. Select CHANNEL.
4. You will now be on the TV menu as shown below, make sure that:
- Tuner mode is on DVB-T/T2
- Crypted set on ALL
- Tuning Type is on AUTO.
5. Press SCAN to scan for all channels, please allow a few minutes for
the scanning to complete.
TV
SCAN
Crypted All
Tuning Type Auto
Tuner Mode DVB-T/T2
To Next Page
Loading...
