OPERATING INSTRUCTIONS
1. TREBLE LEVEL CONTROL
2. BASS LEVEL CONTROL
3. MICROPHONE INPUT LEVEL
CONTROL
4. GUITAR INPUT LEVEL CONTROL
5. ECHO LEVEL CONTROL
6. VOLUME LEVEL CONTROL
7. POWER ON/OFF SWITCH
8. STANDBY BUTTON
9. DC IN JACK
10. AUX IN JACK
11. POWER INDICATOR
12. BATTERY INDICATOR
13. MICROPHONE INPUT JACK
14. GUITAR INPUT JACK
15. NFC AREA
16. BATTERY COMPARTMENT
CHARGING THE BATTERY
Before using the speaker, you must charge the battery. When the battery level of the
speaker is low, the BATTERY INDICATOR starts blinking. When the batter
y is charging,
the BATTERY INDICATOR is illuminated. After the battery has fully charged, the light
switches off. When the battery is fully charged, first disconnect the AC adaptor from the
speaker, then from the wall outlet.
Note: When the AC adaptor is disconnected it is normal for the sound to be reduced. This
occurs naturally to save battery power. Adjust sound to you liking.
USING THE POWER SOURCE
1. Connect the AC adaptor to the DC IN JACK of the speaker firmly, and plug it into a
wall outlet.
2. Slide the POWER ON/OFF switch to “ON” positon, the speaker is in standby mode.
3. You can now press the STANDBY button to turn on the speaker.
4. Slide the POWER ON/OFF switch to “OFF” positon, and pull the AC adaptor out of
the wall outlet if you
want to switch off completely.
ACTIVATING THE BLUETOOTH FUNCTION
When you turn “on” the speaker using the STANDBY, it will enter into the Bluetooth
mode automatically. The POWER INDICATOR turns blue and starts blinking. The
speaker is now in pairing mode
PAIR THE SPEAKER USING NFC
1. With Near Field Communication (NFC), you can easily pair and connect the speaker
to Android device with NFC.
2. If the Android device supports NFC, activate its NFC feature, and touch the NFC
area of the speaker with the NFC area of your Android device. The speaker pairs
and connects to the Android device automatically. For details on NFC, refer to the
user guide of the Android device.
2
To Next Page
Loading...
