BT02WH
SPECIFICATION:
·Bluetooth version: 2.1+EDR
·Support L2CAP/A2DP (AVCTP / AVDTP / AVCRP to receive
stereo audio signal and control the Prev/Next operation of the
audio transmitter by agreement.
·Support HFP (Handsfree profile), equipped with a
speakerphone for voice communications.
·Frequency range: 2.401-2 .480 GHz (2.4GHz ISM Segment)
·Frequency Response: 20Hz~20kHz
· Transmit power: Class2, less than 4dbm, low radiation.
·Scope: <10 meters of wireless communication (consistent
with the Bluetooth protocol specifications CLASS 2)
·The receiver sensitivity: <-90dBm, BER <0.1%
·Coincide with IEEE 802.11
·FM Frequency: 87.5~108.00MHz
·Speaker: 4ohm, 3W
·Rated power: 2W
·SNR: 90dB
·Distortion: <1%
·Power supply: Built-in 800mAh rechargeable lithium battery
·Charging time from empty battery: approximately 7 hours
·Work voltage: 3.6-4.2V
·Work current: <30mA (Bluetooth module)
·Work current: <400mA (power amplifier, Bluetooth )
·Standby current: <3mA
·Product dimensions: 62 x 62 x 60mm
·Product weight: 166g
·Accessory: 1 pc x USB charging cable, 1 pc x Audio cable
14
To Next Page
Loading...
